Dell S4148FE Installationshandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell S4148FE herunter. Dell S4148FE 48 Seiten.

Besides the 10/100/1000Base-T RJ-45 ports, the S4100–ON Series (S4128F-ON, S4148F-ON, and S4148FE-ON) switch provides several

ports for management and storage.

NOTE:

The output examples in this section are for reference only. Your output may vary.

Topics:

•

•

USB storage

•

USB-B console port access

•

Before you install an OS

•

ONIE service discovery

RS-232 console port access

The RS-232 console port is on the PSU-side of the switch, as shown.

Figure 22. RS-232 console port

RJ-232 console port

CAUTION:

Ensure that any equipment attached to the serial port can support the required 115200 baud rate.

NOTE:

Before starting this procedure, ensure your PC has a 9-pin serial port. You must have a terminal emulation program

already installed and running on your PC.

NOTE:

If your PC's serial port cannot accept a female DB-9 connector, use a DB-9 male-to-male adaptor.

Install the provided RJ-45 connector side of the provided cable into the S4100-ON Series console port.

Install the DB-9 female side of the provided copper cable into your PC's serial port. Or install the DB-9 cable into other data terminal

equipment (DTE) server hardware that you intend to use.

Keep the default terminal settings on the console as follows:

•

115200 baud rate

•

No parity

•

8 data bits

Management ports