Dell S6000-ON Installationshandbuch - Seite 31
Blättern Sie online oder laden Sie pdf Installationshandbuch für Schalter Dell S6000-ON herunter. Dell S6000-ON 41 Seiten. Open networking
Auch für Dell S6000-ON: Handbuch "Erste Schritte (26 seiten), Handbuch zur Fehlersuche (29 seiten)
Seite drucken
•
8 data bits
•
1 stop bit
•
No flow control
Accessing the Console Port
To access the console port, use the following steps.
1
Install the provided RJ-45 connector side of the provided copper cable into the S6000-ON console port.
2
Install the DB-9 female side of the provided copper cable into your PC's serial port (or into other DTE terminal server hardware that
you intend to use).
3
Keep the default terminal settings on the S6000-ON console as follows:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
USB-B console port access
The terminal settings are the same for the USB-B port and the console port:
•
115200 baud rate
•
No parity
•
8 data bits
•
1 stop bit
•
No flow control
When you connect the USB-B port, it becomes the primary connection and, when the system is connected, it sends all messages to the
USB-B port.
Figure 16. USB-B console port connector
1—USB-B Port
Management ports
31