Allied Vision MANTA Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Handbuch für Sicherheitskamera Allied Vision MANTA herunter. Allied Vision MANTA 18 Seiten.

Sensor
1. Place the camera on your work bench, with the sensor side facing up.
2. Place the magnifying glass above the camera, with sufficient space to access the TCG and the adhesive
tapes with tools.
3. Take the spatula with one hand.
4. With the spatula, push the cover glass down to keep the sensor protected.
Keep pushing down with the spatula until step
Figure 20: Spatula pushing down the cover glass (schematic view)
5. Take the screwdriver with the other hand.
6. On the left side of the sensor, carefully push the tool tip of the screwdriver against the corner of the
adhesive tape until it starts to come off. Continue lifting up the corner, until pliers can get a grip.
Figure 21: Screwdriver lifting up the adhesive tape (schematic view)
7. Put the screwdriver aside and take the pliers.
8. Keep pushing down with the spatula until step
Tape
Glass
Bare pixel surface
Tape
Mount
Figure 19: Sensor with TCG (schematic view)
15.
Spatula
Adhesive tape
Cover glass
Mount
15.
Page 13 of 18
Preparing Cameras without
Screwdriver
Sensor Cover Glass