Miele DA 292 i Betriebsanleitung - Seite 20
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Lüftungshaube Miele DA 292 i herunter. Miele DA 292 i 28 Seiten.
Seite drucken
Installation
Installation
Pull out the snap fittings from the
slots on the left and right hand sides
of the deflector plate (1).
Press the baffle (2) into the engaging
point. Put the snap fittings back in
place.
The snap fitting with the hole must
be inserted on the right.
Do not wipe off any lubricant.
Hold the template supplied against
the back of the lightshield and mark
the drill hole positions for fixing the
hinges.
20
Only use the template for lightshields
with the following lengths:
DA 262 i
b
598 mm
c
597 mm
d
596 mm
e
595 mm
f
599 mm
DA 262 i
b
23 9/16"
c
23 1/2"
d
23 1/2"
e
23 7/16"
f
23 9/16"
With other lengths adjust the measure-
ments accordingly.
DA 272 i
Da 292 i
698 mm
898 mm
697 mm
897 mm
696 mm
896 mm
695 mm
895 mm
699 mm
899 mm
DA 272 i
Da 292 i
27 1/2"
35 3/8"
27 7/16"
35 5/16"
27 7/16"
35 5/16"
27 3/8"
35 1/4"
27 1/2"
35 3/8"