Miele DA 4228 W Puristic Plus Betriebs- und Installationsanleitung - Seite 34

Blättern Sie online oder laden Sie pdf Betriebs- und Installationsanleitung für Lüftungshaube Miele DA 4228 W Puristic Plus herunter. Miele DA 4228 W Puristic Plus 48 Seiten.

Miele DA 4228 W Puristic Plus Betriebs- und Installationsanleitung
Cleaning and care
Unsuitable cleaning agents
Unsuitable cleaning agents can cause
damage to the surface of the filters if
used regularly.
Do not use:
- cleaning agents containing descaling
agents
- powder cleaners, cream cleaners
- aggressive multi-purpose cleaning
agents or spray cleaners for grease
- oven sprays
Cleaning the grease filters in the
dishwasher
 Place the grease filters upright or
slightly inclined in the lower basket.
Ensure the spray arm is not
obstructed.
 Use a commercially available
household dishwasher detergent.
 Select a dishwasher programme with
a wash temperature between 50 °C
and 65 °C.
Depending on the detergent used,
cleaning the filters in a dishwasher
may cause the inside filter surfaces to
become discoloured. This will not
affect the functioning of the grease
filters in any way.
After cleaning
 After cleaning, leave the filters to dry
on an absorbent surface before
replacing them.
34
 When removing the filters for
cleaning, also clean off any residues
of oil or fat from the now accessible
housing to prevent the risk of these
catching fire.
 Refit the grease filters, making sure
that the latch faces outwards.
 If a grease filter is inadvertently fitted
upside down, insert a small
screwdriver blade into the slit to
disengage the clip.
Resetting the grease filter operating
hours counter
After cleaning, the operating hours
counter needs to be reset.
 Whilst the fan is switched on, press
the operating hours control  for
approx. 3 seconds, until only 1 is
flashing.
The grease filter symbol  goes out.
If you want to clean the grease filters
before the operating hours counter has
reached its maximum:
 Press the operating hours
control  for approx. 6 seconds,
until only 1 is flashing.