Allo RemoteControl AVIDSEN 104250 BRICO Anweisungen - Seite 2

Blättern Sie online oder laden Sie pdf Anweisungen für Controller Allo RemoteControl AVIDSEN 104250 BRICO herunter. Allo RemoteControl AVIDSEN 104250 BRICO 2 Seiten.

Seite drucken

Second type of receiver:

1. Open the casing of your receiver. It is located next to your motor.

2. On the receiver circuit board, press the programming button (RX). Release the

button. The receiver LED comes on. Wait 5 seconds. The receiver LED light turns off.

3. Press a button on your new remote control. Keep it pressed down. The receiver LED

light turns on, Release the button

4. Wait 10 seconds.

5. Your new remote control is programmed

Visit our Website: www.alloremotecontrol.com