Panasonic BM-ET300AE Betriebsanleitung - Seite 17

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Digitalkamera Panasonic BM-ET300AE herunter. Panasonic BM-ET300AE 35 Seiten. Iris camera

Seite drucken

Keep the iris camera away in the following, in addition to the above surroundings.

• Vibration (It may cause invalid iris image capturing and recognition. It may also cause other trouble or damage.)

• Places whose humidity is not between 30 % and 80 % and whose temperature is not between 0 °C and 40 °C {between

32 °F and 104 °F}.

If the camera is located in an area exceeding these ranges, it may cause damage or a malfunction.

• Noise (for example, places near air conditioners or ventilators)

• Electricity

■ Installation Space and Recognition Range

● Keep the Installation Space.

The installation space described in the following illustrations is required.

Note: The height of the iris camera, shown in the figure, is a recommendation. The centre of the optical axis and upside/down-

side limit of the eye position will differ depending on the installation height.

Top View

400 mm {16 in.}

1 100 mm {43 in.}

● Check the Capturing Range.

If the height of the iris camera is 1 300 mm {54.3 in.} as described in the previous "Side View" illustration, the recognition range

will become as follows.

Note: If your eye position is higher than the upside limit,

bend down. If your eye position is lower than the down-

side limit, get on a pedestal, etc.

Keep this area free

from obstructions

700 mm {28 in.}

Side View

400 mm {16 in.}

Side View

35 °

—15 °

300 mm {12 in.}

11 mm {0.43 in.}

1 300 mm {54.3 in.}

Bottom of

0 mm {0 in.}

the camera unit

Keep this area free

from obstructions

700 mm {28 in.}

1 100 mm {43 in.}

Floor

1 710 mm

{67.3 in.}

Upside limit of

the eye position

1 480 mm {58.3 in.}

Center of optical axis

(Recommended

installation height)

1 380 mm

{54.3 in.}

Downside limit of

the eye position

400 mm {15.7 in.}