Panasonic PT-L520E Betriebsanleitung - Seite 2

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Projektor Panasonic PT-L520E herunter. Panasonic PT-L520E 30 Seiten. Lcd projector

Seite drucken

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that

you might require. We hope it will help you to get the most performance out

of your new product, and that you will be pleased with your Panasonic LCD

projector.

The serial number of your product may be found on its back. You should

note it in the space provided below and retain this booklet in case service is

required.

Model number: PT-L720E / PT-L520E

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock

hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The

sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1) Remove the plug from the wall outlet when this unit is not in use for a

prolonged period of time.

2) To prevent electric shock, do not remove cover. No user serviceable

parts inside. Refer servicing to qualified service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is

equipped with a three prong earthing-type power plug. This plug will only

fit an earthing-type power outlet. This is a safety feature. If you are

unable to insert the plug into the outlet, contact an electrician. Do not

defeat the purpose of the earthing plug.

2-E

NGLISH

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT

CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your

safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse

need to be replaced, please ensure that the replacement fuse has a rating of

13 amps and that it is approved by ASTA or BSI to BS1362.

Check for the ASTA mark

or the BSI mark

ASA

If the plug contains a removable fuse cover, you must ensure that it is refitted

when the fuse is replaced. If you lose the fuse cover, the plug must not be

used until a replacement cover is obtained. A replacement fuse cover can be

purchased from an Authorised Service Centre.

If the fitted moulded plug is unsuitable for the socket outlet in your

home, then the fuse should be removed and the plug cut off and

disposed of safely. There is a danger of severe electrical shock if the

cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING: — THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: — The wires in this mains lead are coloured in accordance

with the following code: —

Green-and-Yellow: Earth

Blue:

Brown:

As the colours of the wire in the mains lead of this appliance may not

correspond with the coloured markings identifying the terminals in your plug,

proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be connected

to the terminal in the plug which is marked with the letter E or by the

Earth symbol

or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in

the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal

in the plug which is marked with the letter L or coloured RED.

How to replace the fuse. Open the fuse

compartment with a screwdriver and replace the

fuse.

on the body of the fuse.

Neutral

Live

FUSE

-3

NGLISH