Aquatic AQ-BC-6BT Benutzer- und Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzer- und Installationshandbuch für Mediaplayer Aquatic AQ-BC-6BT herunter. Aquatic AQ-BC-6BT 16 Seiten. Hide-away media player for bluetooth audio & mp3 devices
Auch für Aquatic AQ-BC-6BT: Benutzer- und Installationshandbuch (13 seiten), Benutzerhandbuch (11 seiten), Benutzer- und Installationshandbuch (14 seiten)

Seite drucken

Getting Started

1.4. Mounting the BlueCube+ Media Player

1. Make sure the outside surface is clean

and clear of debris.

2. The BlueCube Media Player has four (4)

front screws. Drive the screws using a screw

driver. Make sure screws are snug and do

not over tighten.

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a 90° angle.

2. Install the Bluetooth antenna as high as

possible, above the waterline of the spa if possible,

and making sure the arrow is pointing directly

upwards towards the sky to ensure the Bluetooth

range is maximized. If there is no suitable surface

to screw it in, we recommend using a good quality

double sided tape.

1.6 Power Attenuation Wires

The AQ-BC-6UBT Bluecube+ stereo's power

is set to -3dB of the maximum power to

avoid blowing very small speakers used spa

applications.

By cutting the black wire only the power/

volume will increase to the maximum (0dB

nominal).

By cutting the white wire only the power/volume will decrease to -6dB.

By cutting both the white and black wires the power/volume will decrease to -9dB.

These modifications should only be carried out by an experienced audio installer.

Should you cut the wrong wires or wish to reconnect them to further alter the attenuation, the Power Attenuation

Wires can be crimped back together.

www.aquaticav.com

BlueCube+ Media Player AQ-BC-6UBT

Black Wire

White Wire

Intact (not cut)

Cut

Intact (not cut)

Cut

Output Level

-3dB

0dB (reference)

-6dB

-9dB