Aquatic Digital Media Locker AQ-DM-6BT Benutzer- und Installationshandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzer- und Installationshandbuch für Inneneinrichtung Aquatic Digital Media Locker AQ-DM-6BT herunter. Aquatic Digital Media Locker AQ-DM-6BT 16 Seiten. Digital media locker for bluetooth & mp3 devices
Auch für Aquatic Digital Media Locker AQ-DM-6BT: Benutzer- und Installationshandbuch (15 seiten)

Seite drucken

Getting Started

1.4. Mounting the Digital Media Locker

1. A mounting template is

included.

Aquatic AV recommends using the 'measure

twice,

cut .once'

method.

2. Once the mounting hole is

complete,

make sure the outside surface is clean and

clear of debris. The Digital Media Locker

has an external water/dust proof

gasket,

but

this requires a clean and flat surface for

best

performance.

The Digital Media Locker has six (6)

front screws. Drive the screws using a screw

driver. During final mounting, apply equal

pressure to all points for the best water/

dust outer seal performance. make sure

screws arB snug and do not over tighten.

4. Review all outside surfaces of the Digi-

tal Media Locker to ensure proper water/

dust seal. This is important for long term

environmental protection performance for

your digital media

device.

1.5 Bluetooth Antenna Installation

1. Screw on the provided Bluetooth Antenna,

avoiding bending the cable at a

goo

angle.

2. Install the Bluetooth antenna as high as

possible, above the waterline of the spa if possible,

and making sure the arrow is pointing directly

upwards towards the sky to ensure the Bluetooth

range is

maximized.

If there is no suitable surface

to screw it in, we recommend using a good quality

double sided tape.

www.aquaticav.com

Digital Media Locker AQ-OM-&BT

26mm

65mm

i..-........

.....................

.........

..;

120mm

-1'

....