Biomorph Pro Plus Desk Kurzanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Kurzanleitung für Inneneinrichtung Biomorph Pro Plus Desk herunter. Biomorph Pro Plus Desk 3 Seiten.
Seite drucken
biomorph
adjustable PACS furniture
ProPlus Table
Cable Management
Questions? call 888 302 3375
Controller
Ground Support Equipment (US) Ltd. DBA biomorph, 11 Broadway, New York, NY 10004 888 302 3375 fax: 212 809 4324 [email protected]
®
Pilot holes for
Waldmann
LED BackLite
Long cables
connect to
FRONT surface
Controller
Echain (important: extend
desktops to full opposite heights to
ensure that cables will travel w/o stress)
43.20"
Short cables
connect to
switch for
REAR surface
FRONT/REAR
surfaces
CableCab
(optional)
Run extra cable length
through the CableCab.
Place plugstrip inside
for connections.
Position with removable
panel facing user.
IMPORTANT: OPERATION & TROUBLESHOOTING
1. Adjust up or down by pushing the up or down arrows.
2. When first assembled or when unplugged, always lower
the table to bottom, release then hold down for 10 seconds
to level surfaces and reset controllers.
3. To set height memory: choose height, press 'S' then '1' or '2'.
To return to preset: press the chosen # (1or 2)
4. Push button w/circular arrow to change from front to rear.
TROUBLESHOOTING: Check all connections and reset per #2.
Desk
frame
Run long cables
through EChain.
Leg-mounted
CPU Holder
(optional)
Mount with
supplied
brackets.