Olympus BX-RFAA Anleitung Handbuch - Seite 34

Blättern Sie online oder laden Sie pdf Anleitung Handbuch für Mikroskop Olympus BX-RFAA herunter. Olympus BX-RFAA 42 Seiten.

Fig. 11

...

Fig. 12

Attaching the Fluorescence Mirror Units

1. Using the Allen screwdriver, loosen the clamping screw @ at the right

side of the illuminator.

2. Pull out the turret and place it upside down.

}Dummy mirror units ² are mounted in the mirror unit positions. Remove

the dummy mirror units from the positions you want to mount mirror units

by loosening the clamping screw ³ of each mirror unit position using

the Allen screwdriver.

3. Hold the fluorescence mirror unit | to be mounted so that the model

name inscription on the side is upside down, align it with the mount

dovetail and insert all the way into the insertion position. Tighten the

clamping screw ³ firmly.

# If the clamping screw ³ is loose, the turret will be unable to be

rotated due to interference with the turret cover.

4. Check the mount dovetail number ƒ and place upside down the

indication sheet of the mounted fluorescence mirror unit into the

indication pocket ... with the same number on the front of the turret.

5. Mount other required fluorescence mirror units in the visible mount dove-

tails by repeating the above steps for each of them.

}If you want to mount more fluorescence mirror units in the mount dove-

tails located under the turret cover, first complete the present procedure

then rotate the turret by motorized operation then mount the mirror units

in the mount dovetails.

6. Place the turret in the original position and tighten the clamping screw @

while pushing the turret in.

(Figs. 11 & 12)