Axminster 107708 Original-Bedienungsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Original-Bedienungsanleitung für Sander Axminster 107708 herunter. Axminster 107708 19 Seiten.

Axminster 107708 Original-Bedienungsanleitung
20. Keep visitors a safe distance from the work area. Keep children away.
21. Make your workshop child proof with padlocks, master switches or by removing starter keys.
22. Give your work undivided attention. Looking around, carrying on a conversation and "horse-play" are
careless acts that can result in serious injury.
23. Maintain a balanced stance at all times so that you do not fall or lean against the sanding belt or other
moving parts. Do not overreach or use excessive force to perform any machine operation.
24. Use the right tool at the correct speed and feed rate. Do not force a tool or attachment to do a job for
which it was not designed. The right tool will do the job better and safer.
25. Use recommended accessories; improper accessories may be hazardous.
26. Maintain machinery with care. Follow instructions for lubricating and changing accessories.
27. Turn off the machine before cleaning. Use a brush or compressed air to remove dust or debris — do
not use your hands.
28. Do not stand on the machine. Serious injury could occur if the machine tips over.
29. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
30. At all times hold the stock firmly.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or
possible machine damage.
This means that if precautions are not heeded, it may result in serious injury or possibly
even death.
Specifications
01) Work table size (mm): 750x250
02) Table travel (mm): 80(up and down)
03) Belt size (mm): 2260x150
04) Belt table size (mm) : 820x170
The above specifications were current at the time this manual was published, but because of
our policy of continuous improvement, the manufacturer reserves the right to change specifications
at any time and without prior notice,without incurring obligations.
05) Belt table tilt (mm): 0 - 90°
06) Dust chute diameter (mm):100
07) Motor (W): 2200W
08) Packing size (mm):1350x650x605 (one case)
2