Alphamount APPSLTK1 Gebrauchsanweisung - Seite 8
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für TV-Halterung Alphamount APPSLTK1 herunter. Alphamount APPSLTK1 12 Seiten. Large tilting tv wall mount
Seite drucken
Step 3A Wood Stud Option
WARNING:
Avoid potential personal injury or property damage! DO NOT over-tighten
the lag screws [G]. Tighten the lag screws [G] only until the washers [H]
are pulled firmly against the wall plate [01 and 02].
DO NOT USE ANCHOR FOR THIS STEP
Ensure the wall plate is securely fastened to the wall before
continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Nominal wood stud size: common 2 x 4 in. (51 x 102 mm)
minimum 1.5 x 3.5 in. (38 x 89 mm)
● Stud center must be verified
3A-1
3A-2
02
Use a stud finder (not included)
to locate wood studs or use an
awl (not included) to verify the
edges. Mark the edge and
center locations.
Position the wall plate at your
desired height and line up the
holes with your stud center line.
Level the wall plate and mark
the holes.
01
7
X
Wall
Anchor
O
awl
(not included)