Accurate Technology TERN2 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fischerei-Ausrüstung Accurate Technology TERN2 herunter. Accurate Technology TERN2 12 Seiten.

Seite drucken

TERN2

Drag

Remember as line comes off the spool and diameter of line on reel lessens the drag will spike up . If you are starting with

10 lbs of drag and half the line is taken off the spool, the drag would now be at 20 lbs . This is not the time to adjust drag

Variance

for a higher setting as you take a chance losing the fish . Best to stay at your original setting and if necessary, back drag off

as last-ditch effort .

Filling the spool with line it's important to put it on evenly and with pressure . Loose line will end up causing problems

Filling

with line biting on itself and lost fish . Please go to a store that has a line machine for the first filling and watch how they

the Spool

do it . It will save you headaches in the future . The other important thing to know is when putting the line on the spool

make sure to put tape on the spool arbor so line attaches to it . Use a good knot like a uniknot or similar and make sure it

is cinched all the way down . This will help avoid line moving on the spool when fighting a fish . Do not overfill the spool as

it will become hard to cast . Leave 1/8" to¼" gap to top of spool .

Rod

Mounting your reel to rod . Most of the new rods

have reel seats of heavy graphite material and will

Mounting

hold reel securely in place once tighten .

This means you do not necessarily need to use

rod clamp but if you are going to all the parts are

enclosed to properly put clamp on rod .

Rod Clamp