arcelik 1060 T Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kühlschrank arcelik 1060 T herunter. arcelik 1060 T 20 Seiten.

Seite drucken

Installation

In case the information which are

given in the user manual are not

taken into account, manufacturer will

not assume any liability for this.

Points to be paid attention

to when the relocation of the

refrigerator

1. Your refrigerator should be

unplugged.Before transportation of

your refrigerator, it should be emptied

and cleaned.

2. Before it is re-packaged,

shelves, accessories, crisper, etc.

inside your refrigerator should be

fixed with adhesive tape and secured

against impacts. Package should

be bound with a thick tape or sound

ropes and the transportation rules

on the package should be strictly

observed.

3. Original packaging and foam

materials should be kept for future

transportations or moving.

Before you start the refrigerator,

Check the following before you

start to use your refrigerator:

1. Attach 2 plastic wedges as

illustrated below. Plastic wedges are

intended to keep the distance which

will ensure the air circulation between

your refrigerator and the wall. (The

picture is drawn up as a representation

and it is not identical with your

product.)

2. Clean the interior of the

refrigerator as recommended in the

"Maintenance and cleaning" section.

3. Connect the plug of the

refrigerator to the wall socket. When

the fridge door is opened, fridge

internal lamp will turn on.

4. When the compressor starts to

operate, a sound will be heard. The

liquid and gases sealed within the

refrigeration system may also give rise

to noise, even if the compressor is not

running and this is quite normal.

5. Front edges of the refrigerator

may feel warm. This is normal. These

areas are designed to be warm to

avoid condensation.

Electrical connection

Connect your product to a grounded

socket which is being protected by a

fuse with the appropriate capacity.

Important:

The connection must be in compliance

with national regulations.

• The power plug must be easily

accessible after installation.

• Electrical safety of your refrigerator

shall be guaranteed only if the earth

system in your house complies with

standards.

• The voltage stated on the label

located at left inner side of your

product should be equal to your

network voltage.