Accurion halcyonics i4medium Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Laborausrüstung Accurion halcyonics i4medium herunter. Accurion halcyonics i4medium 13 Seiten. Active vibration isolation desktop unit

Specifications

Available Standard Versions
halcyonics_i4
halcyonics_i4 M6/25
Performance Specifications
Isolation Technology:
Force directions:
Isolation performance:
Active bandwidth:
Settling time:
Response time:
Max. correction forces:
Load capacity:
Other Specifications
Dimensions:
Weight:
Table top material:
Top plate surface flatness:
Max. compensation level:
Repeatability of load
adjustment:
Environmental and Operational Requirements
Electrical voltage:
Fuse (inside i4):
Power consumption:
Operating temperature:
Operating humidity:
Operating altitude:
Operating condition:
Pollution degree:
*
Floating table top is supported by steel springs; low-pass characteristics of spring-mass combination
dominates the dynamic behaviour above 200 Hz.
** The settling time and maximum compensation level depend on several conditions, such as payload, frequen-
cy, load distribution and height of the payload. For that reason this value should be considered as an estima-
tion.
*** The response time determines when the system starts to actively isolate an incoming vibration after detec-
tion by the sensors.
halcyonics_i4medium
halcyonics_i4medium M6/25
halcyonics_i4medium 150 kg
halcyonics_i4medium 150 kg M6/25
Accurion control technology based on piezoelectric type acceleration pickup, fast
signal processing and electro-dynamic type force transducers
Active compensation in all six degrees of freedom
> 5 Hz = 25 dB (94.4%); >10 Hz = 40 dB (99.0%)
0.6 – 200 Hz*
300 ms**
0.5 ms***
Vertical ± 8 N; horizontal ± 4 N
i4: 0 – 120 kg (0 - 265 lbs) / i4medium + i4 large: 0 - 105 kg (231 lbs) or
40 - 150 kg (88 - 330 lbs)
i4: 400 x 500 x 90 mm (15.7" x 19.7" x 3.5") / i4medium: 600 x 600 x 90 mm (23.6"
x 23.6" x 3.5") / i4large: 550 x 700 x 92 mm (21.7" x 27.6" x 3.6")
i4: 20 kg (44 lbs) / i4medium: 37 kg (81 lbs) / i4large: 40 kg (88 lbs)
Powder coated aluminium
± 0.10 mm over complete surface
500 µm/s at 6 Hz and with a load of 60 kg (132 lbs)**
120 µm
100 - 240 V AC/47 – 63 Hz
250V / F3,15A (Fuse may be changed by authorized service staff only!)
Typically 40 - 45 W
15 – 40°C (59 – 104 F)
0 – 60%
< 2500 m (8100 ft)
Use in non-mobile laboratories only
2 (according to DIN EN 61010-1)
halcyonics_i4large
halcyonics_i4large M6/25
halcyonics_i4large 150 kg
Halcyonics_i4large 150 kg M6/25
- 10 -