Accuris ASPIRE Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Laborausrüstung Accuris ASPIRE herunter. Accuris ASPIRE 8 Seiten. Laboratory aspirator

Seite drucken
Hz
Please note technical specifications may change without notice.
Guidance and manufacturer's declaration – Electromagnetic Emissions
The ACCURIS ASPIRE LABORATORY ASPIRATOR is intended for use in the electromagnetic environment
The customers or the user of the ACCURIS ASPIRE LABORATORY ASPIRATOR should assure that it's used in
Emissions Test
Power disturbance
CISPR11
Irradiated / Conducted emissions
CISPR11
Harmonic emissions IEC/EN
61000-3-2
Voltage fluctuations / flicker
emissions
IEC/EN 61000-3-3
Guidance and manufacturer's declaration – Electromagnetic Immunity
THE ACCURIS LABORATORY ASPIRATOR is intended for use in the electromagnetic environment specified
Users of this product should assure that it's used in such an environment.
Immunity Test
Electrostatic discharge (ESD)
IEC/EN 61000-4-2
Electrical fast transient / burst
IEC/EN 61000-4-4
Surge
IEC/EN 61000-4-5
Loss of voltage, brief voltage
interruptions and variations
IEC/EN 61000-4-11
Magnetic field
~
I
O
such an environment.
± 2kV power supply
± 1kV differential mode
5%U
40%U
70%U
specified below.
Compliance
Group 1
Class [B]
Class [A]
Complies
below.
Compliance
± 6kV on contact
± 8kV in air
for 0.5 cycle
T
for 05 cycle
T
for 25 cycle
T
<5%U
T
for 5 sec
3A/m
4
Alternate Current
Mains Frequency
ON
OFF
Electromagnetic environment -
guidance
THE ACCURIS LABORATORY
ASPIRATOR
RF emissions are very low and will
not cause interference in proximity
to any Electronic appliances.
THE ACCURIS LABORATORY
ASPIRATOR can be used in all
environments, including domestic
and those connected directly to the
public mains distribution that
supplies power to environments
used for domestic scopes.
Electromagnetic environments -
guidance
Floors should be wood, concrete or
ceramic tile. If floors are covered
with synthetic material, the relative
humidity should be at least 30%.
Mains power quality should be that
of a typical commercial
environment.
Mains power quality should be that
of a typical commercial
environment.
Mains power quality should be that
of a typical commercial
environment.
The power frequency magnetic field