ArchWork LSDMX Benutzerhandbuch - Seite 2

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte ArchWork LSDMX herunter. ArchWork LSDMX 2 Seiten. Dmx control interface

Seite drucken

DMX control interface »

WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future

reference. It contains important information about the installation, usage and maintenance of the unit.

General instruction

• The products referred to in this manual conform to the European Community Directives

and are therefore marked with

never connect to AC220V. Leave servicing to skilled personnel only. Never make any

modifications on the unit not described in this instruction manual, otherwise you will risk

an electric shock. • Connection of the power adapter must be made to a power supply

system fitted with efficient earthing (Class I appliance according to standard EN 60598-

1). It is, moreover, recommended to protect the supply lines of the units from indirect

contact and/or shorting to earth by using appropriately sized residual current devices.

• The connection to the main network of electric distribution must be carried out by a

qualified electrical installer. Check that the voltage correspond to those for which the

unit is designed as given on the electrical data label. • This unit is not for home use, only

professional applications. • Never use the fixture under the following conditions: - in place

subject to excessive humidity; - in places subject to vibrations or bumps; - in places with

a temperature of over 60°C or -20°C. • Make certain that no inflammable liquids, water or

metal objects enter the fixture. • Do not dismantle or modify the fixture. • All work must

always be carried out by qualified technical personnel. Contact the nearest sales point

foran inspection or contact the manufacturer directly. • If the unit is to be put out of

operation definitively, take it to a local recycling plant for a disposal which is not harmful

to the environment.

Warnings and installation precautions

• When carrying out any work, always comply scrupulously with all the regulations

(particularly regarding safety) currently in force in the country in which the fixture's being

used. • If this device will be operated in any way different to the one described in this

manual, it may suffer damage and the guarantee becomes void. Furthermore, any other

operation may lead to dangers like short circuit, burns, electric shock, etc. • Before starting

any maintenance work or cleaning the projector, cut off power from the main supply. • Do

not touch the power cables if your hands are wet. • Keep any inflammable material at a

safe distance from the fixture. • When cleaning unit, please do not use solvents such as

acetone or alcohol, since they may damage the of the unit outer finish.

Description and technical specifications

DMX control interface for LEDSTRIP.

• Manual mode through dip-switches to control colour changes and automatic programs.

• DMX channel selection to link the interface to external DMX consoles.

• 3 channels operating mode.

• Input connections: XLR-3p plug, RJ45 socket.

• Output connections: XLR-3p socket, RJ45 socket.

• Max output of current: 3x4A

• Max power: 3x48W (144W)

• Dimensions: 165x75x40 mm

Installation

The LSDMX should be placed on a non-flammable flat surface in any orientation and fixed

by the two screws. There are two mounting holes on the housing.

Linking

After making the connection LSDMX supply (DC12V~ 24V), connect the unit with other

devices in the manner shown in diagram below. The LSDMX is equipped with two types of

connectors: 3-pole XLR and RJ45.

INPUT

OUTPUT

V-

V+

Nero

Verde

Rosso

Blue

Power

AC110V~230V

DMX512 Console

The information provided in this manual has been carefully checked. However Music & Lights is not responsible for any possible inaccuracy.

Design and specifications are subject to change without notice.

For further information, please contact our Service Center: tel. +39 0771 72190 fax +39 0771 721955 - [email protected]

LSDMX

. • Supply voltage of this product is DC12V~24V;

DC12V~24V

com V+ V-

Ch3

Ch2

Ch1

DIP Switch

DMX512IN

DMX512OUT

3 Pin signal wires

DMX512OUT

Functions and settings

LSDMX has a basic control panel consists of a DIP-switch (fig.2). Each individual switch has

a number (DIP switch [1] a [10]).

Switch number

Manual mode

To set the manual mode is necessary to position the DIP-switch [8] & [9] to "OFF" and the

DIP-switch [10] to "ON". DIP-switch [1 - 7] allow the setting of colors as shown in the fol-

lowing table:

Red

Green

NOTE - When the DIP-switch set to "ON", the priority is given to the DIP-switches with

higher value.

Automatic mode

To set the automatic mode is necessary to position the DIP-switch [10] to "ON". Other set-

tings are shown in the following table:

• DIP-switch [8] to "ON" shows the seven-color jumpy changing effect.

• DIP-switch [9] to "ON" shows the seven-color gradual changing effect.

Every effect has different speeds from slow to fast (setting DIP-switch [1 - 7] to "ON").

SPEED (Slow - Fast)

DMX mode

To set the DMX mode is necessary to position the DIP-switch [10] to "OFF".

As DMX interface, the unit has 3 poles XLR contacts and RJ45 connectors. The following

table shows the operating mode and DMX value.

The address is set to start as a binary number by means of DIP-switch n° 1 - 9. Thus, it ap-

pears the addition values of DIP-switches positioned to ON.

Example:

Address 24: switch n° 4 and 5 set

to ON

The easiest way is to start from the highest possible place value and to add the smaller

values until the start address will result.

AC110V~230V

power

adapter

Ch3

Ch2

Ch1

DIP Switch

DMX512IN

3 Pin signal wires

User Manual

DIP-switch

Blue

Yellow Purple

Cyan

DIP-switch

SHOW

(Seven-color jumpy

changing effect)

Channel

Function

RED 0-100%

GREEN 0-100%

BLUE 0-100%

AC110V~230V

power

adapter

DC12V~24V

com V+ V-

DMX512OUT

DIP Switch

3 Pin signal wires

Fig.1

Fig.2

White

OFF

SHOW

(Seven-color gradual

changing effect)

DMX value

000 - 255

Fig.3

AC110V~230V

power

adapter

DC12V~24V

com V+ V-

Ch3

Ch2

Ch1

DMX512IN

DMX512OUT