DIGISYNTHETIC DSP1400E Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken DIGISYNTHETIC DSP1400E herunter. DIGISYNTHETIC DSP1400E 18 Seiten. Integrated dsp power amplifier

DIGISYNTHETIC DSP1400E Benutzerhandbuch
III. PC SOFTWARE OPERATION
The software adopts the advanced telecommunication control technology. The
user can control the gain, EQ, crossover, delay, limiter, program management etc.
through the interface software. The below introduces establish the connection and
program management operation.
A. Establish the connection
1. Installing the Software
Run the application <>. Setup will install the DSP6 application onto your PC. You
can accept the default director y, or specify a different location to install the
application.
2. Connecting a PC
Use a standard computer cable (accessor y with the unit) to connect a PC to the
DSP amplifier.
3. Configure COM port
Click on Tools in the top menu bar, and select COM Setup... to open the COM Setup
window. The application uses COM1 on the PC by default. If necessar y, you can
change the COM port used by the application. Click the COM Select: COM1 pull-
down box in the COM Setup window, all the serial ports available in the PC list
automatically, then select the desired COM port and click OK button.
Select Search...to open search function that will find out all the units in the net. The
multiple units with the same Address (master ID) and different Sub Address (slave ID)
can not be identified. You can identify such units only from the Sub Address (slave
ID), please keep the Sub Address (slave ID) so that you can control such units when
connecting with PC
8