Sharp 14BM2 Service-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Service-Handbuch für TV Sharp 14BM2 herunter. Sharp 14BM2 40 Seiten.

FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
NO. Adjustment part
Adjusting procedure and conditions
1
CONTRAST
1. Receive "Monoscope Pattern" signal.
KEY
2. Set P-Mode to select CONTRAST.
3. Press Volume Up/Down key to check whether
the CONTRAST effect is OK or not.
2
1. Receive "Colour Bar" signal.
COLOUR KEY
2. Set P-Mode to select COLOUR.
3. Press Volume Up/Down key to check whether
the COLOUR effect is OK or not.
3
BRIGHTNESS
1. Receive "Monoscope Pattern" signal.
KEY
2. Set P-Mode to select BRIGHTNESS.
3. Press Volume Up/Down key to check whether
the BRIGHTNESS effect is OK or not
4
TINT KEY
1. Receive the "NTSC Colour Bar" signal thru AV
in.
2. Set P-Mode to select TINT.
3. Press Volume Up/Down key to check TINT, UP
for GREEN direction and DOWN for PURPLE
direction whether is OK or not.
5
SHARPNESS
1. Receive "Monoscope Pattern" signal.
2. Set P-mode to select SHARPNESS.
KEY
3. Press Volume Up/Down key to check whether
the SHARPNESS effect is OK or not.
6
CH DISPLAY
1. All Ch (1~99) will have an OSD display of the
COLOUR
channel number in green colour under AFT ON
condition.
7
NORMAL KEY
1. Once in PICTURE Mode, and the NORMAL
key is pressed, all the settings will be present
to normal setting.
(Normal setting value for every mode).
» CONTRAST
» COLOUR
» BRIGHTNESS
» TINT
» SHARPNESS
8
WHITE TEMP
1. Receive "Monoscope Pattern" signal.
2. Set FUNCTION to select WHITE TEMP.
3. Press Volume Up/Down key to check WHITE
TEMP Option, STANDARD:
NORMAL SETTING, WARM for more RED-
DISH direction changing, COOL for more BLU-
ISH direction changing.
Waveform and others
Note:If nothing is display mean
contrast, colour, bright, tint
or sharpness are all in nor-
mal setting.
: MAX
: CENTER
: CENTER
: CENTER
: CENTER
10-1
FUNCTION OPERATION CHECKING (VIDEO AND AUDIO)
(Continued)
NO. Adjustment part
Adjusting procedure and conditions
9
COLOUR
1. Receive the "PAL COLOUR BAR" signal, press
SYSTEM
the COLOUR SYSTEM key to select modes
except PAL, check the COLOUR is not work-
ing properly. Then, select the "PAL" mode.
Check again its colour so that it is working prop-
erly.
2. Receive "SECAM COLOUR BAR" signal,
press COLOUR SYSTEM key to select modes
except SECAM, check the COLOUR is not
working properly. Then, select the "SECAM"
mode. Check again its colour so that it is work-
ing properly.
3. Receive "NTSC 4.43/3.58 COLOUR BAR" sig-
nal thru AV, press COLOUR SYSTEM key to
select modes except N4.43/3.58, check the
COLOUR is not working properly. Then, se-
lect the "NTSC 4.43/3.58" mode. Check again
its colour so that it is working properly.
10
SOUND
1. Receive "PAL-D/K" signal, press the "SOUND
SYSTEM
SYSTEM" turn to B/G, I. Check the sound out-
put is not working properly. Select D/K and
check the sound output to make sure it is work-
ing properly.
2. Receive "PAL-I" signal, press the "SOUND
SYSTEM" to select B/G, D/K. Check the sound
output is not working properly. Select I and
check the sound output to make sure it is work-
ing properly.
3. Receive "PAL-B/G" signal, press the "SOUND
SYSTEM" to select I, D/K. Check the sound
output is not working properly. Select B/G and
check the sound output to make sure it is work-
ing properly.
11
NOISE MUTE
1. Receive "PAL COLOUR BAR" signal.
CHECKING
2. Turn up the volume control to maximum, make
sure the sound is heard from the speakers.
Then put the unit in no signal state.
3. Check the sound mute is effective.
4. Finally turn sound level of CTV to minimum.
12
OSD
There are six language as below;
LANGUAGE
English, Russian, Chinese, French, Arabic and
QUANTITY
Malay.
CHECK
Waveform and others
10-2