Sharp 19C140 Service-Handbuch - Seite 6
Blättern Sie online oder laden Sie pdf Service-Handbuch für TV Sharp 19C140 herunter. Sharp 19C140 24 Seiten. Service manual
Seite drucken
- 1. Table of Contents
- 2. Electrical Specifications
- 3. Important Service Safety Precaution
- 4. Location of User's Control
- 5. Installation and Service Instructions
- 6. Chassis Layout
- 7. Block Diagram
- 8. Schematic Diagrams
- 9. Printed Wiring Board Assemblies
- 10. Replacement Parts List
- 11. Packing of the Set
19C140
For adjustments of this model, the bus data is converted to various analog signals by the D/A converter
circuit.
Note: There are still a few analog adjustments in this series such as focus and master screen voltage.
Follow the steps below whenever the service adjustment is required. See "Table-B" to determine, if serv-
ice adjustments are required.
1. Service mode
Before putting unit into the service mode, check that
customer adjustments are in the normal mode. Use
the reset function in the video adjustment menu to
ensure customer controls are in their proper (reset)
position.
2. Service number selection
Once in the service mode, press the Ch-up or Ch-
down button on the remote controller or at the set.
The service adjustment number will vary in
increments of one, from "S01" to "OP". Select the
item you wish to adjust.
3. Data number selection
Press the Vol-up or down button to adjust the data
number.
SERVICE ADJUSTMENT NUMBER
To enter the service mode and exit service
mode.
While pressing the Vol-up and Ch-up buttons at the
sametime, plug the AC cord into a wall socket.
Now the TV set is switched on and enters the service
mode.
To exit the service mode, turn the television off by
pressing the power button.
DATA NUMBER
CHANNEL
S01
55(085)
Figure A.
6
02
S01 D:00