Sharp Notevision XG-C330X Setup-Handbuch - Seite 24

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Projektor Sharp Notevision XG-C330X herunter. Sharp Notevision XG-C330X 45 Seiten. True xga portable lcd projectors
Auch für Sharp Notevision XG-C330X: Spezifikationsblatt (2 seiten), Spezifikationen (2 seiten), Spezifikationen (2 seiten)

Seite drucken

Sharp Notevision XG-C330X Setup-Handbuch

Controlling the Projector via LAN

After connecting the projector to your network, enter the projector IP address in "Address"

on Internet Explorer (version 5.0 or later) using a computer on the network to start a setup

screen that will enable control of the projector via the network.

Controlling the Projector

Using Internet Explorer

(Version 5.0 or later)

Complete connections to external equipment

before starting the operation. (See pages 21-

29 of the projector's operation manual.)

Complete the AC cord connection. (See page

30 of the projector's operation manual.)

Note

• When connecting the projector to the LAN, use

a LAN cable (Category 5). When connecting the

projector to a hub, use a straight-through cable.

Start Internet Explorer (version 5.0

or later) on the computer.

Enter "http://" followed by the

projector IP address set by the

procedure on page

by "/" in "Address", and then

press the "Enter" key.

• The factory default setting for the

projector : "DHCP Client" is "Off" and IP

address is "192.168.150.2". If you did

not change the IP address in "3. Setting

up a Network Connection for the

Projector" (pages 22-23), enter "http://

192.168.150.2/".

A screen for controlling the pro-

jector appears, ready for per-

forming various status condi-

tions, control, and settings.

-24

followed