ACD DS210 Series Hardware-Dokumentation - Seite 8

Blättern Sie online oder laden Sie pdf Hardware-Dokumentation für Handhelds ACD DS210 Series herunter. ACD DS210 Series 20 Seiten.
Auch für ACD DS210 Series: Kurzer Überblick (15 seiten)

Seite drucken

4.3 Remove the M210 out of the docking station DS210

Pic. 4: Remove the M210 out of the docking station DS210

The charging and communication contacts are sensible!! Please

remove the device only as descibed above. Do not touch the

contacts! Not with your fingertips nor with tools like ball pen,

ATTENTION

screwdriver etc.

4.4 Data transfer via USB to a PC

A usual USB A-B cable is used. Plug the USB-B plug of the cable in the USB-B connector of the DS210 and

the USB-A connector of the cable in the PC. A connection via USB with ActiveSync from Microsoft is

possible from version number 3.7.

You have to wait at least 3s between taking out the M210 and

placing it in the docking station again. Otherwise the ActiveSync

connection might possibly not be established properly. As the

ATTENTION

Connect LED does not check if the driver is being loaded, it will

show a connection in this case anyway!

4.5 Connection of a USB end device

USB end devices can be connected to the USB-A connector of the DS210. The driver of the USB memory

stick is integrated in the image of the M210 by default. A USB memory stick will be recognized automatically

as a further drive of Windows CE.

Other software drivers for other USB end devices can be integrated by ACD in the image of the M210 on

request.

4.6 Connection to the Ethernet (optional interface)

Plug the network cable in the RJ45 connector with the LED at the back of the DS210. After placing the M210

in the DS210 wait approx. 15s until the USB Ethernet driver has loaded completely. After these 15s the Icon

USB Ethernet driver (MOSUSBCE1) will appear in the task bar. You can modificate different settings when

double-clicking this Icon.

Via DHCP an IP address can be assigned automatically to the M210 in the DS210. Alternatively a fix IP

address can also be entered manually.

DS210_HardwareDocu_V1.50_EN.doc

8 / 20