ACD GRUPPE F160 Kurzer Überblick - Seite 6
Blättern Sie online oder laden Sie pdf Kurzer Überblick für Touch-Terminals ACD GRUPPE F160 herunter. ACD GRUPPE F160 16 Seiten. Vehicle terminal
Seite drucken3.1.2 Switching off
To shut down the device, you may either use the software or press a customised key (default setting: ACD
key) for 5 seconds (default setting). If the device is in standby mode, this is indicated by flashing of the green
LED. The device can be switched off completely by switching the ON/OFF switch at the bottom of the device
to position "0" (Figure 4).
Detailed instructions for configuring the ON/OFF behavior can be requested from the manufacturer if
required.
Figure 4: Switching off
3.2 Connection Ports of the Device
The connections are at the rear side of the device. Each connection is described in the following section.
The interfaces will be explained in detail in the following figures 6 - 12.
10
11
Figure 5: Bottom of the Device
ATTENTION
MFT920_F160_Fusion_Summit_Brief_Overview_FCC_V1.50_en.doc
13
9
8
Unintended use of the interfaces should be avoided.
7
12
6
2/4
6 / 16