Ricoh PRO C9110 Hinweise für Benutzer - Seite 2

Blättern Sie online oder laden Sie pdf Hinweise für Benutzer für Drucker Ricoh PRO C9110 herunter. Ricoh PRO C9110 2 Seiten.
Auch für Ricoh PRO C9110: Dieses Handbuch zuerst lesen (40 seiten), Handbuch zur schnellen Fehlersuche (5 seiten)

Seite drucken

Connecting the Machine/ System Settings

Connecting the Machine > Connecting to the Interface

Additional information

•

A plate is usually on the part as shown in the figure. As a customer engineer removes the plate, con-

tact your service representative when connecting the interface cable.

Troubleshooting

Getting Started > When You Check the Indicator Lamps, Status Icons, and Messages on

the Control Panel > When the Indicator Lamp for the [Check Status] Key Is Lit or Flashing >

The machine is unable to connect to the network.

Correction

Error

Solution:

•

Check that the machine is correctly connected

to the network and that the machine is cor-

rectly set. For details about how to connect the

network, see "Interface Settings", Connecting

the Machine/ System Settings.

Troubleshooting

When Messages Appear>When Other Messages Appear > When the Home Screen Cannot

Be Edited > "The image data size is not valid. See the manual for required data."

Correction

Error

Solution:

For details about file size for shortcut image,

see "Displaying an Image on the [Home] Screen",

Convenient Functions.

Troubleshooting

When Messages Appear>When Other Messages Appear > When the Home Screen Cannot

Be Edited > "The format of the image data is not valid. See the manual for required data.

Correction

Error

Cause:

The file format of the shortcut image to be added is

not supported.

Solution:

The file format of shortcut images to be added

must be PNG. Specify the image again.

Guide to Paper

Handling Paper > Using Special Types of Paper > Magnet Paper

Correction

Error

If the last sheet of the magnet paper does not feed

correctly when you print a stack of magnet paper,

place some thick paper under the last sheet of the

magnet paper, and then re-load it.

Corrections

Solution:

•

Check that the machine is correctly connected

to the network and that the machine is correctly

set. For details about how to set the machine,

see "Interface Settings", Connecting the Ma-

chine/ System Settings.

Corrections

Solution:

For details about file size for a Home Screen image,

see "Displaying an Image on the [Home] Screen",

Convenient Functions.

Corrections

Cause:

The file format of the Home Screen image to be

added is not supported.

Solution:

For details about file size for a Home Screen image,

see "Displaying an Image on the [Home] Screen",

Convenient Functions.

Corrections

The last sheet of the magnet paper in the paper tray

may not be fed properly because the magnet sheet

sticks to the metallic parts of the paper tray.

If this is the case, load sheets of magnet paper you

want to print in the paper tray by adding 10 sheets

or more to them.

Troubleshooting

When Adjusting the Color Registration Shift

Additional information

Adjusting Image Density

To improve color reproduction and achieve color output with consistent quality, follow this

procedure. You can improve CMYK image reproduction by adjusting image density and

performing calibration.

Also, you can improve mixed color reproduction by adjusting image density and color reg-

istration and performing calibration.

For details about calibration, check the color controller's manual.

Press the [User Tools] key.

Press [Adjustment Settings for Operators].

Press [Machine: Image Quality].

Press [0207: Adjust Image Density Before Auto Color Calibration].

Press [Image Density Adjustment: Manual Execute].

Press [OK].

When the color density adjustment is completed, press [Exit].

Press [Exit].

•

Make sure that the transition time to energy saving mode is long enough so that transition to energy

saving mode does not happen before carrying out tone correction.

•

During tone correction, do not print or specify settings from the operation panel.

•

Complete the tone correction procedure promptly without taking intervals.

•

It is recommended to restart the tone correction procedure from the beginning if printing is carried out

or intervals are taken during the procedure.

Guide to Paper

Handling Paper > Loading Paper

Correction

Error

•

For coated paper, label paper, film paper, and

tick paper of 150.1 g/m2 or heavier, fan the

stack of paper before loading it in the paper

tray.

•

If the machine you are using has a function to

compensate for curled paper, you can specify

curl compensation in the machine's settings.

See the manuals supplied with the machine for

details about how to configure this setting.

Corrections

•

For coated paper, label paper, film paper, and

plain paper, fan the stack of paper before loading

it in the paper tray.

•

If the machine you are using has a function to

compensate for curled paper, you can specify

curl compensation in the machine's settings.

See the manuals supplied with the machine for

details about how to configure this setting. When

there is no function to compensate for curled

paper, either place the curled side facing down

or flatten the curled paper, and then set it in the

tray.

Printed in France

EN GB

M238-1044A