Ricoh SP3 Technisches Bulletin - Seite 20

Blättern Sie online oder laden Sie pdf Technisches Bulletin für Drucker Ricoh SP3 herunter. Ricoh SP3 28 Seiten.

RTB Correction

Reissue date: 30-Apr-98

The items in bold italics have been corrected or added.

An illustration has been added.

Model:

SP3

Subject:

Duplex Jam

From:

QAC Field Information Dept.

Troubleshooting

Classification:

Mechanical

Paper path

Other (

SYMPTOM

1. During paper feed from the duplex unit, the leading edge of the paper is bent or a no-

feed jam occurs.

2. During stacking in the duplex unit, a stacking jam occurs.

ACTION

1. Paper feed jam (leading edge bent or non-feed)

1) Check to see if the duplex guide mylar is set properly. If it is bent or out of position,

please replace the duplex guide mylar (A1344670) or the duplex guide plate

(A1344662) .

Method: Rotate the feed roller by hand. If it makes a clicking sound it is OK.

(If the mylar is bent or out of position, the leading edge of the copy may be bent or

no-feed jams may occur.)

Reattaching the mylar (as shown below) is a temporary countermeasure. As a

permanent countermeasure, the duplex guide plate should be replaced.

echnical

Part information

Electrical

Transmit/receive

)

ulletin

Date:

15-Apr-98

Prepared by:

A.Sasaki

Action required

Service manual revision

Retrofit information

PAGE: 1/4

No:

0.7mm