Cisco Unified IP Phone Expansion Module 7915 Handbuch - Seite 11

Blättern Sie online oder laden Sie pdf Handbuch für IP-Telefon Cisco Unified IP Phone Expansion Module 7915 herunter. Cisco Unified IP Phone Expansion Module 7915 27 Seiten. Unified ip phone and expansion module for unified communications manager express 4.3 and later versions
Auch für Cisco Unified IP Phone Expansion Module 7915: Kurzreferenz (2 seiten)

Seite drucken

Cisco Unified IP Phone Expansion Module 7915 Handbuch

Insert the hooks into the slots and then rotate the top

Step 3

of the Cisco Unified IP Phone Expansion Module 7915

into the support bar so that it rests flush with the bar.

Tighten the thumbscrew on the back of the

Step 4

Cisco Unified IP Phone Expansion Module 7915.

Note

Connect the Interface Cable

Refer to Figure 5 which depicts the "in" and "out" icons on the

AUX jacks, and to and the steps that follow.

Figure 5

"In" and "Out" Icons on the AUX Jacks

In icon

Plug one end of the interface cable into the jack labeled

Step 1

AUX on the Cisco Unified IP Phone.

Plug the other end of the interface cable into the AUX

Step 2

jack with the "in" icon underneath on the

Cisco Unified IP Phone Expansion Module 7915.

Note

If you are installing two Expansion Modules,

repeat Steps 2, 3, and 4 for the second

Expansion Module.

Out icon

If you are installing a second Cisco Unified

IP Phone Expansion Module 7915, continue

with Steps 3 and 4. Otherwise go to the

"Connect the Power Supply Unit" section on

page 12.