Cisco 1805 Hardware-Installationshandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Netzwerk-Router Cisco 1805 herunter. Cisco 1805 12 Seiten. Integrated services router
Auch für Cisco 1805: Installieren und Ersetzen (4 seiten), Schnellstart-Handbuch (4 seiten), Datenblatt (10 seiten)
Seite drucken
Chapter 8
Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers
Figure 8-9
Step 4
Insert the connector on the AIM into the AIM connector on the system board. (See
Note
Step 5
Insert the screws from the accessory kit through the AIM into the metal standoffs. (See
Carefully tighten the screws with a Phillips screwdriver.
Check that the AIM is installed correctly on the system board. (See
Step 6
OL-14661-01
Connecting the AIM to the System Board
AIM
Snap-in
plastic
standoff
Be sure to press firmly on the AIM until the board seats onto the connector. The plastic standoff
must snap into the hole in the AIM board. (See
Modules Internal to the Cisco 1805 Cable Router
Figure
8-9.)
Cisco 1805 DOCSIS Cable Router Hardware Installation Guide
Metal standoffs
Figure
8-9.)
Figure
Figure
8-10.)
8-9.)
8-9