Actulux HCVAR 500/1000 Anleitung Handbuch - Seite 11
Blättern Sie online oder laden Sie pdf Anleitung Handbuch für DC-Antriebe Actulux HCVAR 500/1000 herunter. Actulux HCVAR 500/1000 12 Seiten. Chain drive
Seite drucken
Function of remote control for HCVAR
Note!
The remote control is operated
at a short press per function.
Long pressures will cause shorter
battery life.
Pairing HCVAR with remote control
By default, HCVAR comes with a paired remote control (item no.# 111890).
One chain drive remember max. 20 pcs. remote controls.
1) Press and hold the "program button" on the chain drive until the
2) Within 5 seconds - press any button on the remote control and its LED indicator lights up.
3) The LED / Buzzer indicator in the chain drive turns off after one flash / beep = the remote
control and chain drive are now paired.
If you need to remove one remote, you have to delete all of them; by pressing the "Program
button" for more than 3 seconds until the LED / Buzzer indicator has been switched on and off
again. Now all remote controls are deleted and you need to pair all of them again.
Pairing HCVAR with wireless wind / rain sensor
It is possible to connect a wind / rain sensor wireless to the chain drive.
(See our user manual for wind and rain sensor at www.actulux.com)
Rain sensor # 111960
Wind- & rain sensor # 111961
To access the "Program button" in the drive,
remove the plastic cap on the top of the housing.
LED / Buzzer indicator lights / beeps.
RELEASE THE BUTTON IMMEDIATELY.
Close
Stop
Program button
11
HCVA/HCVAR
Open
Red LED