Sony BAVIA XBR-65X850E Referenzhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Referenzhandbuch für TV Sony BAVIA XBR-65X850E herunter. Sony BAVIA XBR-65X850E 24 Seiten.

Seite drucken
Sony BAVIA XBR-65X850E Referenzhandbuch
• Install the TV so that the TV's Table-Top Stand does not
protrude out from the Stand (not supplied). If the Table-
Top Stand protrudes out from the Stand, it may cause TV
set to topple over, fall down, and cause personal injury or
damage to the TV.
XBR-75/65/55X900E
XBR-75/65X850E
• Route all AC power cords and connecting cables so that
they are not accessible to curious children.
Recommended Measures to Secure the
TV
Consider the following measures when securing your TV to
a Stand (not supplied).
1
Secure the Stand for the TV.
Make sure the Stand can adequately support the weight
of the TV. Use two angle braces (not supplied) to secure
the Stand. For each angle brace use the appropriate
hardware to:
• Attach one side of the angle brace to the wall stud.
• Attach the other side to the Stand.
4
US
Angle brace
(not supplied)
Stand
2
Secure the TV to the Stand.
Use the optional hardware listed as follows (not
supplied):
• M6 machine screws (screwed into the TV's rear cover).
• A screw or similar (attach it to the Stand).
• Rope or chain (strong enough to support the weight of
the TV). Make sure that there is no excess slack in the
rope or chain.
XBR-75/65/55X900E
Screw hole on the rear cover
Rope or chain (not supplied)
Screw (not supplied)
M6 machine screw
(previously removed)