Cisco MX300 G2 Handbuch "Erste Schritte - Seite 23

Blättern Sie online oder laden Sie pdf Handbuch "Erste Schritte für Konferenz-System Cisco MX300 G2 herunter. Cisco MX300 G2 46 Seiten.
Auch für Cisco MX300 G2: Installation von (7 seiten), Installation von (7 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten), Kurzreferenz-Handbuch (2 seiten)

Cisco TelePresence Video Systems

Contents

Configuration using the web interface

You have to use the Touch controller or the remote control for

the configurations, until you know your system's IP address.

Finding the IP address

Tap

Settings > System Information

on your Touch controller; or

navigate to

Home > Settings > System information

the remote control and on-screen menu.

In both cases you can find the IPv4 address and/or IPv6 address

of the system in the

Network

section.

Signing in to the web interface

1. Open a web browser and enter the system's IP address in

the address bar.

2. Enter your user name and password and click

The default user name is

admin

with no password set.

If you are not able to connect to the system:

• Make sure the system and computer are connected to the

same network.

• Make sure the system is switched on.

If the system has just been switched on, wait a few minutes to

allow the system to start up.

Back to task overview

D14639.15 Video Systems Getting Started Guide TC7.2, OCTOBER 2014.

Introduction

User interfaces

if you use

Sign

In.

Configuration

The web interface

Getting Started Guide

Appendices

Contacts