Digitrax DN166I1A Anleitungsblatt - Seite 2

Blättern Sie online oder laden Sie pdf Anleitungsblatt für Medienkonverter Digitrax DN166I1A herunter. Digitrax DN166I1A 8 Seiten. Complete train control fits intermountain n scale ft a units

Seite drucken

Parts List

1 DN166I1A Mobile Decoder

Installation Information

See the Digitrax Decoder Manual for complete decoder test procedures, instal-

lation instructions, programming and technical information. Digitrax manuals

and instructions are updated periodically. Please visit www.digitrax.com for the

latest versions, technical updates and additional locomotive-specific installation

instructions. CAUTION: Programming and layout track must not exceed

16V when using this decoder.

Installation Instructions

Carefully remove the locomo-

tive's shell from the frame by

inserting two toothpicks under

the unit's ladders as shown.

Once you've positioned the

toothpicks, grasp the frame and

toothpicks with one hand and

the locomotive's shell with the

other hand and carefully sepa-

rate the two.

Once the shell is off, remove the

existing light board by removing

the two screws located on the

diagonal corners of the board.

The final step in removing the

lightboard is to carefully unsol-

der the two wires leading from

the headlight assembly.

Take the new DN166I1A de-

coder and place it on top of the

frame. Note proper orientation.

The decoder's brass motor con-

tacts should fit in the frame slot

as shown.

Solder headlight leads to the

new decoder board as shown If

you were sitting in the cab, the

yellow lead would be on your

left and the green lead would be on your right. The final step is to secure the

decoder with the original screws. Note: the locomotive's frame halves may

have to be loosened slightly to achieve proper alignment.

Tooth-

picks

inserted

under the

steps

Figure 1: Insert

toothpicks as shown

Figure 2: Grasp toothpicks and gently

remove shell from frame.

Figure 3: Unscrew, unsolder and remove

standard lightboard

— 2 —

1 Instruction Sheet