Cisco UCS B200 M3 Installations- und Wartungshinweise - Seite 25

Blättern Sie online oder laden Sie pdf Installations- und Wartungshinweise für Netzwerk-Hardware Cisco UCS B200 M3 herunter. Cisco UCS B200 M3 36 Seiten. Blade server
Auch für Cisco UCS B200 M3: Installationshandbuch (34 seiten), Installations- und Wartungshinweise (37 seiten), Handbuch (8 seiten), Upgrade-Handbuch (21 seiten), Installations- und Wartungshinweise (28 seiten)

S e n d d o c u m e n t c o m m e n t s t o u c s - d o c f e e d b a c k @ c i s c o . c o m

Place the CPU on the base with the registration marks aligned as shown in

Step 4

Press the central button on the alignment tool to release the CPU into the socket.

Step 5

Figure 15

Close the socket latch. See

Step 6

Secure the first hook, marked with an

Step 7

Secure the second hook, marked with an

Step 8

Using the tube of thermal compound provided with replacement CPUs and servers (available separately

Step 9

as UCS-CPU-GREASE=), add a protective film of thermal compound to the bottom of the heat sink

where it will contact the CPU.

Replace the heat sink (UCSB-HS-01-EP). See

Step 10

Caution

The heat sinks are keyed to fit into the plastic baffle extending from the motherboard. Do not force a

heatsink if it is not fitting well, rotate it and re-orient the heat sink.

Secure the heat sink to the motherboard by tightening the four captive screws in an X pattern as shown

Step 11

in the upper right of

OL-26624-01

Inserting the CPU and Replacing the Heat Sink

Figure

15.

15, callout 1.

icon. See

Figure

15, callout 2.

icon. See

Figure

15, callout 4.

Cisco UCS B200 M3 Blade Server Installation and Service Note

Working Inside the Blade Server

Figure

15.

15, callout 3.