Cisco SCE8000 GBE Installation von - Seite 16
Blättern Sie online oder laden Sie pdf Installation von für Server Cisco SCE8000 GBE herunter. Cisco SCE8000 GBE 21 Seiten. 10gbe platform
Auch für Cisco SCE8000 GBE: Schnellstart-Handbuch (25 seiten), Konfigurationshandbuch (18 seiten), Verfahren zum Entfernen und Ersetzen (36 seiten)
Installing the Chassis Brackets
Installing the Chassis Brackets
The chassis is shipped with the mounting brackets installed on the front of the chassis. These brackets
can be installed on the rear of the chassis.
To install the brackets on the rear of the chassis, perform these steps:
Remove the screws that secure the brackets to the chassis. (See
Step 1
Figure 4-13
Brackets on Cisco SCE8000 Chassis
FA N ST
SCE 8000
-SC M-E
AT U S
SC M
1
OPT ICA L
BYP ASS
CON SOL
E
POR T 1
10 100
1000
SCE 8000
-SC M-E
SC M
2
OPT ICA L
BYP ASS
CON SOL
E
POR T 1
10 100
1000
SCE 8000
-SIP
SIP
3
4
TX
SC E8 00
0- FA N
RX
Step 2
Position one of the brackets against the chassis side, and align the screw holes.
Step 3
Secure the bracket to the chassis with the screws removed in Step 1.
Step 4
Repeat
Installing the Chassis in the Rack
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
Caution
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit. Lift the unit only by grasping the chassis underneath its lower edge.
Cisco SCE8000 10GBE Installation and Configuration Guide
4-16
STA TUS
LINK
ACT IVE
OP TIC AL
BY PAS S
STA TUS
LINK
OP TIC AL
ACT IVE
BY PAS S
SPA -1X1
0GE -L-V
2
SPA -1X1
0GE -L-V
2
TX
TX
TX
A C
CT RL
B
RX
D
RX
A B
C
D
RX
ST AT US
OP TIC AL
BY PA SS
OP B- SC
1
E8 K- MM
Step 2
and
Step 3
for the other bracket.
SCE 8000
EXTE NDE
D SER VICE
CON TRO
L MOD ULE
MA STE R
SYS TEM
PO WE R
SCE 8000
EXTE NDE
D SER VICE
CON TRO
L MOD ULE
MA STE R
SYS TEM
PO WE R
SPA -1X1
0GE -L-V
2
SPA -1X1
0GE -L-V
2
Chapter 4 Installing the Cisco SCE8000 Chassis
Figure
4-13.)
OL-21054-04