Cisco SNS-3595-K9 Installation der Software - Seite 10
Blättern Sie online oder laden Sie pdf Installation der Software für Server Cisco SNS-3595-K9 herunter. Cisco SNS-3595-K9 38 Seiten.
Auch für Cisco SNS-3595-K9: Installationshandbuch (36 seiten)
Seite drucken
Unpack and Inspect the Server
When you are installing a server, use the following guidelines:
• Plan your site configuration and prepare the site before installing the server. See the
• Ensure that there is adequate space around the server to allow for servicing the server and for adequate
• Ensure that the air-conditioning meets the thermal requirements listed in the
• Ensure that the cabinet or rack meets the requirements listed in the
• Ensure that the site power meets the power requirements listed in the
Caution
Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems such
as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic patterns.
Unpack and Inspect the Server
Caution
When handling internal server components, wear an ESD strap and handle modules by the carrier edges only.
Note
Keep the shipping container in case the server requires shipping in the future.
Note
The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or any
items are missing, contact your customer service representative immediately.
To inspect the shipment:
Step 1
Remove the server from its cardboard container and save all packaging material.
Step 2
Compare the shipment to the equipment list provided by your customer service representative and the list given below.
Verify that you have all items.
Step 3
Check for damage and report any discrepancies or damage to your customer service representative. Have the following
information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Install Cisco ISE Software on Cisco SNS Appliances
10
Preparation Guide
for the recommended site planning tasks.
airflow. The airflow in this server is from front to back.
page
12.
If available, you can use an uninterruptible power supply (UPS) to protect against power failures.
Install Cisco ISE Software on Cisco SNS Appliances
Cisco UCS Site
Server Specifications, on
Rack Requirements, on page
Power Specifications, on page
12.
13.