CUCM Integration with Content Server 6.2
Field
Destination Address
Destination Port
SIP Trunk Security
Profile
Rerouting Calling Search
Space
Out-of-Dialog Refer
Calling Search Space
SIP Profile
Step 8
Click Save.
SIP Trunk created successfully.
Step 9
Click Reset.
SIP Route pattern Configuration Setting:
There are two way to configure call Routing for a SIP Trunk:
1.
Using Route pattern (For IP Address/ Domain based Routing).
•
Recording Alias URI Suffix on TCS should match with suffix based SIP route pattern that
configured on CUCM.
Eg: If SIP route pattern configured on CUCM is '@tcs-cisco.com' then the recording alias URI
2.
Using Number Based Routing.
•
Recording Alias URI Suffix on TCS should match with IP or FQDN configured on CUCM SIP trunk
created for TCS.
Eg: If number based route pattern configured on CUCM is 555X, then the recording alias URI configured
on TCS must be '555X@<IP' or 'FQDN configured on CUCM Sip Trunk for TCS>'.
In Cisco Unified Communications Manager Administration, use the Call Routing > SIP Route Pattern
menu path to configure SIP route patterns.
CUCM uses SIP route patterns to route or block both internal and external calls.
The domain name or IP address provides the basis for routing. The administrator can add domains, IP
addresses, and IP network (subnet) addresses and associate them to SIP trunks (only). This method
allows requests that are destined for these domains to be routed through particular SIP trunk
interfaces.
Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide
3-20
Chapter 3
Configuring a Cisco Unified Communications Manager SIP Trunk with a Cisco TelePresence
Setting
Enter the IP address of the Cisco TCS to which CUCM will connect.
We recommend that you accept the default of 5060.
Select the name of the SIP trunk security profile that you created in the
"Create the SIP Trunk Security Profile" procedure on page
example, click "Cisco TCS SIP Trunk Security Profile."
Select the name of the calling search space that is used by user phones.
Select the name of the calling search space that is used by user phones.
Select the name of the SIP profile that you created in the
SIP Profile" procedure on page
SIP Profile."
"To Create the
3-17. For example, select "Cisco TCS 6.2
3-15. For
Seite drucken