Cisco VG202 Software-Konfigurationshandbuch - Seite 41

Blättern Sie online oder laden Sie pdf Software-Konfigurationshandbuch für Gateway Cisco VG202 herunter. Cisco VG202 50 Seiten. Voice gateways
Auch für Cisco VG202: Hardware-Installationshandbuch (50 seiten), Handbuch (10 seiten), Hardware-Installationshandbuch (48 seiten), Schnellstart-Handbuch (19 seiten)

This appendix describes the ROM monitor (also called the bootstrap program), which is the firmware

that runs when you power on or restart the Cisco VG202 and Cisco VG204 voice gateways (VG). During

normal operation, the ROM monitor helps to initialize the processor hardware and boot the operating

system software. You can also use the ROM monitor to help you isolate or rule out hardware problems

that you encounter while installing your voice gateway.

This appendix contains the following sections:

•

To use the ROM monitor, you must be using a terminal or PC that is connected to the voice gateway over

the console port.

Perform these steps to configure the voice gateway to boot up in ROM monitor mode the next time it is

rebooted.

SUMMARY STEPS

OL-16191-01

Entering the ROM Monitor Mode, page A-1

ROM Monitor Commands, page A-2

Command Descriptions, page A-3

Configuration Register, page A-4

Console Download, page A-6

Debug Commands, page A-7

Exiting the ROM Monitor, page A-8

enable

configure terminal

config-register value

exit

reload

Cisco VG202 and Cisco VG204 Voice Gateways Software Configuration Guide

A P P E N D I X

A-1