3Com OfficeConnect WX1200 Schnellstart-Handbuch - Seite 10

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Netzwerk-Router 3Com OfficeConnect WX1200 herunter. 3Com OfficeConnect WX1200 10 Seiten. Secure converged networks enterprise edition
Auch für 3Com OfficeConnect WX1200: Schnellstart-Handbuch (10 seiten), Schnellstart-Handbuch (2 seiten), Datenblatt (6 seiten), Produkthandbuch (15 seiten)

3Com OfficeConnect WX1200 Schnellstart-Handbuch
10
M
S
S
OBILITY
YSTEM
Configuring a Mobility Domain for Roaming
This procedure configures multiple WX switches to
form a Mobility Domain. A Mobility Domain allows
users to seamlessly roam from one WX switch to
another. A Mobility Domain uses one seed switch.
The other switches are members.
Add the switches to the same VLAN. Users can be in
the same or different VLANs, and the user VLANs do
not need to be configured on all the switches. Users
can log on and roam the network from the seed
switch, or from any member switch, by tunnelling
through any other switch that contains their VLAN.
For simplicity, the quickstart command assigns all
users to the default VLAN.
Figure 2 Mobility Domain Deployment
WX1200-C orp
10.10.10.4
Console
Port
Port
2
3
MAP
MAP
user2
bob
Configuring the Seed
Configure WX1200-Corp as the seed:
1
WX1200-Corp# set mobility-domain mode seed
domain-name Corp
WX1200-Corp# set mobility-domain member 10.10.90.4
Q
S
G
OFTWARE
UICK
TART
UIDE
WX1200-C orp 2
Router
10.10.90.4
10.10.10.1
10.10.90.1
Port
Port
2
3
MAP
MAP
user1
Verify and save the configuration changes on
2
WX1200-Corp.
WX1200-Corp# display config
# Configuration nvgen'd at 2005-1-09 00:42:46
# Image 6.0.1.0.64
...
set mobility-domain mode seed domain-name Corp
set mobility-domain member 10.10.90.4
WX1200-Corp# save config
Configuring a Member
Use the quickstart command to configure basic system
1
parameters on a second switch (WX1200-Corp2).
Configure WX1200-Corp2 as a member of the
2
Mobility Domain.
WX1200-Corp2# set mobility-domain mode member
seed-ip 10.10.10.4
Verify and save the configuration changes:
3
WX1200-Corp2# display config
# Configuration nvgen'd at 2007-1-09 00:42:46
# Image 6.0.1.0.64
Console
set mobility-domain mode member seed-ip 10.10.10.4
WX1200-Corp2# save config
Copyright © 2007, 3Com Corporation. All rights reserved.
Unless otherwise indicated, 3Com registered trademarks are registered in the United
alice
States and may or may not be registered in other countries. 3Com is a registered
trademark of 3Com Corporation. The 3Com logo is a trademark of 3Com Corporation.
Mobility Domain, Mobility Point, Mobility Profile, Mobility System, Mobility System
Software, MP, MSS, and SentrySweep are trademarks of Trapeze Networks, Inc.
Intel and Pentium are registered trademarks of Intel Corporation. Microsoft,
MS-DOS, Windows, Windows XP, and Windows NT are registered trademarks of
Microsoft Corporation.
All other company and product names may be trademarks of the respective
companies with which they are associated.