Epson Stylus Color 400 Benutzerhandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Drucker-Zubehör Epson Stylus Color 400 herunter. Epson Stylus Color 400 29 Seiten. Ms windows 3.x color printer drivers problems
Auch für Epson Stylus Color 400: Spezifikationsblatt (2 seiten), Produkt-Informationsblatt (4 seiten), Handbuch (12 seiten), Handbuch (13 seiten), Handbuch zur Schnelleinrichtung (13 seiten), Produktinformation Handbuch (12 seiten), Produkt-Support-Bulletin (6 seiten), Produkt-Support-Bulletin (4 seiten)

Epson Stylus Color 400 Benutzerhandbuch

3.2.4.6.2 Removing the Right and Left LD Roller Assembly

1. Disassemble the ASF assembly, and remove the paper feed roller assembly and hopper assembly from
the ASF body. (See Section 3.2.4.6.)
2. Take out right and left compression springs (1.66 g) from the back of the hopper assembly.
3. Pull out the cam part of the hopper assembly from the frame hole located on the right side of the paper
feed roller assembly.
4. Pull out the LD roller shaft. The paper feed roller assembly and hopper assembly should be disconnected
by now.
5. Release the hook for the LD roller assembly from the shaft hole in the paper feed roller assembly. Also,
release the attached hook for the LD roller cover and remove the LD roller assembly.
;
When installing the LD roller assembly, make sure the hooks are hung on the paper feed assembly.
;
During assembly, when installing the compression spring (1.66 g) into position in the paper feed
assembly, hang the spring on the hook temporarily. Do not forget to release the hooks for these
springs from the holes in the back of paper feed assembly by rotating the springs. (See figure below.)
Right or Left
LD Roller Assembly
During assembly, insert the
compression spring (1.66 g) for
the paper feed assembly in this
position, and hang the bent part
of the spring on the hook.
Figure 3-17. Disassembly of Paper Feed Roller Assembly
EPSON Stylus COLOR 400 Service Manual
Right or Left
LD Roller Cover
+
Paper Feed Sheet Holder
Right or Left
Paper Feed Assembly
Disassembly and Assembly
Compression Spring (1.66 g)
3-21