ARGSeguridad ZDAS-300 Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitssystem ARGSeguridad ZDAS-300 herunter. ARGSeguridad ZDAS-300 16 Seiten. Luxury voiced lcd alarm system

Seite drucken

Zone 3 selected

SET

The above shows that the No 3 zone configured to be a Entry/Exit, Active Sounder when

Arming and there are sensors in this zone.

Zone 8 selected

SET

The above shows No 8 zone configured, a watchdog zone (24 hour armed), there

are Sensors in this Zone.

BasicFlow chart for registering devices,sSet zone type,set system configuration

and program C.S. phone numbes and site code in disarmed mode.

TYPE

The above chart shows the basic principle of operation of the System. The security

system contains alarm panel, remote key fob, pir detectors, door/window magnetic contact

and high decibel integral siren Also available are some optional Devices such as wired/

wireless Smoke detectors, Gas detector, Flood detector, Temperature detector.The wireless

detector Communicates to the Control Panel by radio on 433 MHZ Frequency and each

detector has an approximate range of 50 Metres dependent on the Local Environments.

The wired detector are also workable.

1.3 Component Parts

The wired/Wireless Alarm Panel:

This 8 Zone Alarm panel is the central information processor of the system, receiving

and dealing with all the Alarm Signals from the various Detectors. It also contains the

central Station communicator and By-directional Audio Verification mechanism.

Everything you need to know about the security system is displayed on the panel keypad

LCD. The zones, 24 Hours, Armed, Part armed, Disarmed and the important Messages

regarding system status are displayed on the LCD screen. See section 2.1 and 2.2

Wireless Remote Key Fob:

The remote key fob is used to Arm,part arm,disarm the system or to request Assistance

from the C.S. This could mean the summoning of the Emergency Services such as Police,

Fire, Ambulance or just a member of the family. It is also used in the Programming and

device registration for system access.

1.4 Optional Extra Detectors available

Wired/Wireless Magnetic Door / Window contact: (option)

The Magnetic Door contact is used to detect the opening of doors or windows. When

activated it will transmit an alarm signal to the Control Panel to indicate a door or window

has been compromised. It consists of detector with an integrated wireless transmitter and

magnet.

Wired/Wireless PIR detector: (option)

The Passive Infrared detector responds to mobile body heat emissions. If anyone enters

the area of an Armed Zone, once the infrared detector in that Armed Zone detects their

presence it will transmit an alarm signal to the Control Panel.