Toshiba SD-170EKB Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für DVD-Spieler Toshiba SD-170EKB herunter. Toshiba SD-170EKB 24 Seiten.
Seite drucken
Connections
Connecting to television
IMPORTANT!
– You only need to make one video connection
from the following options, depending on the
capabilities of your television.
– Connect the DVD player directly to the televi-
sion.
Using SCART socket
MAINS
Use the scart cable to connect the DVD SCART OUT
A
to the corresponding scart input socket on the TV
(cable not supplied).
If your DVD player will not be connected to a Stereo
System or AV Receiver to hear better sound, scart is
enough for both audio and video connections.
Using Composite Video Jack(CVBS)
MAINS
Use the composite video cable (yellow) to connect
A
the DVD player' s VIDEO OUT(CVBS) jack to the
video input jack(or labelled as A/V in,Video In or
Composite) on the TV(cable supplied).
To hear the sound of this DVD player through your
TV, use the audio cables(white/red)to connect AU-
DIO OUT(L/R)jacks of the DVD player to correspond-
ing AUDIO IN jacks on the TV(cable supplied).
Helpful hint: before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
Using Component Video Jacks(Y P
MAINS
IMPORTANT!
-The progressive scan video quality is only pos-
sible when using Y P
TV is required.
Use the component video cables (red/blue/green) to
A
connect the DVD player' s Y P
responding Component video input jacks (or labelled
as Y P
P
) on the TV (cable not supplied).
b
r
Use the audio cables (white/red) to connect AUDIO
B
OUT (L/R) jacks of the DVD player to the correspond-
ing AUDIO IN jacks on the TV (cable not supplied).
Proceed to page 11 for detailed Progressive Scan set
C
up.
Using a RF modulator
MAINS
IMPORTANT!
-If your TV only has a single Antenna In jack (or
B
P
and a progressive scan
B
R
P
jacks to the cor-
B
R
P
)
R