Arisco BW800 Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Waschmaschine Arisco BW800 herunter. Arisco BW800 19 Seiten. Glass washing machine

FINAL CHECK BEFORE START UP

The users should fulfill the following last-controls by accepting

wastewater , installations to be carried out by the authorized technicians;

You must be sure that the power supply and grounding installation are ensured as required in leaflets of electrical

equipment.

You must be sure that the feeding water has been installed and the water vane is turned on.

You must be sure that the wastewater installation was done properly and discharging hose was coupled with

discharging pipe tightly.

Have a specialist electrician your device working 220-230 V connect to the K-automat fuses group.

Device must not be operated without being made adequate grounding and from the electricity source, which do not

have leak current relay.

Water supply connection must be made and its valve must be open

Water drainage connection must be made.

Before placing things into the baskets, solid wastes must be cleaned and subjected to pre-washing by washing buttery

with sprayer.

Do not place more dirty dishes than stated in the Table into baskets.

Do not use any detergent for pre-washing.

Keep the very dirty dishes (waiting ones more than 2-3 hour) under water until complete dissolving

Do not wash materials made of plastic.

Use foam controlled liquid detergent in your machine.

Have the detergent firm dosing apparatus to supply detergent into your machine connect.

Have the detergent firm dosing apparatus to supply polisher into your machine connect.

Check the water supply hose and water drainage connection.

Fix overflow pipe into its place.

Open the valve of pressured hot water supply.

Place the basket, in which you place the things to be washed, in machine.

Close the cover of the device.

Press ON/OFF switch (A). The machine takes the water inside and begins heating the water. The Water Temparature

Indicatory Lamp (D) turns on when water temparature is ready.

Wait until this lamp (D) turns on.

Press Cycle Start Push Button (B) throught three seconds. The machine will start the washing cycle.

The washing keeps proceeding while "It's washing" lamp (E) keep turned on and the lamp (E) will turned off after the

washing cycle finish.

After a working day, to drain the water manually from machine; (only for the machines with drain pump)

- Turn off the machine by pressing ON/OFF switch(A)

- Open the door

- Take off the drain pipe and keep the door open.

- And press Drain Pump Switch (it can only be seen with the machines with drain pump). During you keep pressing the

switch, the machine will drain the water from the machine manually.

Washing time: 1. Programme : 120 sec

the required couplings of fresh water, electric,

11 / 19