Pioneer Super Tuner IIID DEH-3250UB Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Auto-Empfänger Pioneer Super Tuner IIID DEH-3250UB herunter. Pioneer Super Tuner IIID DEH-3250UB 24 Seiten. Cd receiver/radio cd/cd player

Seite drucken

Operating this unit

FAD/BAL (fader/balance adjustment)

You can change the fader/balance setting.

1 Press M.C. to display the setting mode.

2 Press M.C. to cycle between fader and balance.

3 Turn M.C. to adjust speaker balance.

Adjustment range (front/rear): F15 to R15

Adjustment range (left/right): L15 to R15

FR 0 is the proper setting when only two speakers

are used.

EQUALIZER (equalizer recall)

There are six stored settings DYNAMIC (dynamic),

VOCAL (vocal), NATURAL (natural), CUSTOM (cus-

tom), FLAT (flat) and POWERFUL (powerful).

When FLAT is selected no adjustments are made

to the sound.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the equalizer.

DYNAMIC VOCAL NATURAL CUSTOM

FLAT POWERFUL

3 Press M.C. to confirm the selection.

TONE CTRL (equalizer adjustment)

You can adjust the bass/mid/treble level.

Adjusted equalizer curve settings are stored in

CUSTOM.

1 Press M.C. to display the setting mode.

2 Press M.C. to select BASS (bass)/MID (mid)/TRE-

BLE (treble).

3 Turn M.C. to adjust the level.

Adjustment range: +6 to -6

LOUDNESS (loudness)

Loudness compensates for deficiencies in the low-

and high-frequency ranges at low volume.

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

OFF (off) LOW(low) HIGH (high)

3 Press M.C. to confirm the selection.

SLA (source level adjustment)

SLA (Source level adjustment) lets you adjust the vo-

lume level of each source to prevent radical changes

in volume when switching between sources.

Settings are based on the FM volume level, which

remains unchanged.

Before adjusting source levels, compare the FM

volume level with the level of the source you wish

to adjust.

The AM volume level can also be adjusted with

source level adjustments.

1 Press M.C. to display the setting mode.

2 Turn M.C. to adjust the source volume.

Adjustment range: +4 to –4

3 Press M.C. to confirm the selection.

Notes

When selecting FM as the source, you cannot

switch to SLA.

Operation is complete even if the menu is can-

celled before being confirmed.

Initial Settings

Press SRC/OFF and hold until the unit

turns off.

Press M.C. and hold until CLOCK SET ap-

pears in the display.

Turn M.C. to select the initial setting.

After selecting, perform the following proce-

dures to set the initial setting.

CLOCK SET (setting the clock)

1 Press M.C. to display the setting mode.

2 Press M.C. to select the segment of the clock dis-

play you wish to set.

Each time you press M.C., one segment of the

clock display is selected.

Hour Minute

As you select segments of the clock display, the

selected segment flashes.

3 Turn M.C. to adjust the clock.

FM STEP (FM tuning step)

Section