Pioneer CLD-3390 Betriebsanleitung - Seite 30

Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CLD-3390 herunter. Pioneer CLD-3390 41 Seiten. Cd cdv ld player

Seite drucken

PARTICULAR

FUNCTIONS

FOR

CD - Direct CD/Peak Level Search

Direct CD

Since the picture circuit is deactivated and the interference

between signals is eliminated with the Direct CD function,

more pure sound can be reproduced.

@ When the Direct CD function is activated, the player does

not display information on the monitor screen.

e@ In Direct CD mode, time for starting play becomes short

compared with that of normal play operation.

1 Press DIRECT CD on the front panel.

DIRECT CD

2 Open the disc table,

EJECT

ee,

Remote control unit

Front panel

@ The disc table comes out according to the CD size.

Peak Level Search

3 Start play.

PLAY

a e Ose

Remote control unit

Front panel

To exit Direct CD mode:

Press DIRECT CD again. Also, when the video part of CDV is

played, Direct CD mode is canceled automatically.

To play an LD:

Cancel the Direct CD mode. Otherwise, the LD cannot be set

on the disc table.

NOTE:

During LD or CDV {video part) play, the player does not enter

Direct CD mode even if DIRECT CD is pressed.

When playing the audio part of CDV, you can press DIRECT

cD.

With this function, the peak level of CD or CDV (audio part) can

easily be searched for. This is convenient for adjusting the

proper recording level.

To search for the peak level of the entire disc:

1 Press PEAK SEARCH on the front panel.

PEAK

ra)

The player scans the entire disc and searches for the peak

level.

It takes for about 1 minute and 20 seconds with 60-

minute disc. While searching, the PEAK indicator is lit on the

display.

To search for the peak level of the programmed tracks:

Program the desired tracks beforehand (page 34) and press

PEAK SEARCH.

The player scans all of the programmed

tracks and searches for the peak level between them.

To adjust the recording level

1. When the player detects the peak level, the section which

contains the peak level is played repeatedly for about 8

seconds.

2. Adjust the recording fevel on the tape deck.

3. Set the tape deck to recording mode and start CD play by

pressing >/>i<.

NOTES:

@ The player sometimes

detects the different peak

level

even

when

the

peak

function

carried out on one disc.

@ With

some

discs,

the player cannot

detect

the

proper peak level. This is not a malfunction.