Pioneer 383-S - DV-383S DVD Player Betriebsanleitung - Seite 19
Blättern Sie online oder laden Sie pdf Betriebsanleitung für DVD-Spieler Pioneer 383-S - DV-383S DVD Player herunter. Pioneer 383-S - DV-383S DVD Player 44 Seiten. Pioneer dvd player operating instructions
Seite drucken
Getting started
Basic playback controls
The table below shows the basic controls on
the remote for playing discs. The following
chapter covers other playback features in more
detail.
Button
What it does
Starts playback.
If the display shows RESUME or
LAST MEM playback starts from the
resume or last memory point (see
also Resume and Last Memory
below.)
Pauses a disc that's playing, or
restarts a paused disc.
Stops playback.
See also Resume and Last Memory
below.
Press to start fast reverse scanning.
(remote
Press
(play) to resume normal
only)
playback.
Press to start fast forward scanning.
(remote
Press
(play) to resume normal
only)
playback.
Skips to the start of the current
track, title or chapter, then to
previous tracks/titles/chapters.
Skips to the next track, title or
chapter.
Numbers
Use to enter a title/chapter/track
(remote
number. Press
only)
• If the disc is stopped, playback
starts from the selected title (for
DVD) or track (for CD/Video CD
).
Super VCD
• If the disc is playing, playback
jumps to the start of the selected
title (VR mode DVD-RW), chapter
(DVD-Video) or track (CD/Video CD/
Super VCD).
ENTER
to select.
/
Resume and Last Memory
When you stop playback of a DVD, CD, Video
CD/Super VCD or DivX video discs, RESUME is
shown in the display indicating that you can
resume playback again from that point.
If the disc tray is not opened, the next time you
start playback the display shows RESUME and
playback resumes from the resume point. (If
you want to clear the resume point, press
(stop) while RESUME is displayed.)
With DVDs and Video CD/Super VCDs, if you
take the disc out of the player after stopping
playback, the last play position is stored in
memory. If the next disc you load is the same
one, the display shows LAST MEM and
playback will resume. For DVD-Video discs, the
player stores the play position of the last five
discs. When one of these discs is next loaded,
you can resume playback.
Note
• The Last Memory function doesn't work
with VR format DVD-RW discs.
• If you don't need the Last Memory function
when you stop a disc, you can press
OPEN/CLOSE to stop playback and open
the disc tray.
04
19
En