Whirlpool UXT4030ADS0 Installationsanleitung und Gebrauchs- und Pflegeanleitung - Seite 9
Blättern Sie online oder laden Sie pdf Installationsanleitung und Gebrauchs- und Pflegeanleitung für Lüftungshaube Whirlpool UXT4030ADS0 herunter. Whirlpool UXT4030ADS0 24 Seiten. 30" (76.2 cm) and 36" (91.4 cm) range hood
Seite drucken
Replacing
the Incandescent
Light Bulb
Turn off the range hood and allow the light bulb to cool.
1. Disconnect
power.
2. Squeeze the plastic lens cover and remove it from the hood.
3. Screw a 120V, 75W maximum, incandescent
light bulb with
E26 base into the socket.
4. Replace the lens cover by squeezing the cover and inserting
the tabs into the slots.
5. Reconnect power.
If the new light does not operate, make sure the light bulb is
inserted correctly before calling service.
WIRING DIAGRAM
SE113B
Light Switch
On- Off
Fc:_===m
BK
w
\
/
\
Motor Characteristics
PowerSupply
120 VAC
Frequency
60 Hz
Amperage
0.35 _+10%A
Wattage Rating
21 _+0% Watts
Motor Resistance
White- Red
46.9 _+10% Ohms
N
Motor Switch
Low- Off- High
BK
j
rri
Ground
Screw
111
GND