Whirlpool UXT5230BDB0 Installationsanleitung und Gebrauchs- und Pflegeanleitung - Seite 11

Blättern Sie online oder laden Sie pdf Installationsanleitung und Gebrauchs- und Pflegeanleitung für Lüftungshaube Whirlpool UXT5230BDB0 herunter. Whirlpool UXT5230BDB0 30 Seiten. 30" (76.2 cm) and 36" (91.4 cm) range hood

Seite drucken
To Replace the Filter:
1. To reinstall the filter, place the back edge of the filter into the
channel at the rear of the range hood.
2. Pull the filter latch toward the front of the range hood and
push the front of the filter up into place.
3. Release the filter latch. It will spring back into place to secure
the filter.
4. Replace the screw in the filter retainer.
Replacing
a Halogen
Lamp
Turn off the range hood and allow the halogen lamp to cool. To
avoid damage or decreasing the life of the new lamp, do not
touch the lamp with bare fingers. Replace the lamp, using tissue
or wearing cotton gloves to handle the lamp.
If new lights do not operate, make sure the lamps are inserted
correctly before calling service.
1=
2.
Disconnect
power.
Use a flat-blade screwdriver and gently pry the light cover
loose.
3. Remove the lamp and replace it with a 120-volt, 40-watt
maximum, halogen lamp made for a G-9 base.
4. Replace the light cover.
5. Reconnect power.
WIRING DIAGRAM
N
8
Ground
Screw
Gnd
SwitchOperation
L-1
Lamps 120V 1.5Ohms
L-2 Speed1 120V 1.5Ohms
L-3 Speed2 120V 2.0 Ohms
L-4 Speed3 120V 2.5 Ohms
W
Y
w
SE119A
i
BK (Line)
Y (Lamp)
GY (Speed3)
Mechanicalpush buttons I
(_ butt_ (_)3sp_sc)
I'
"
TII
S15
R (Speed2)
BR (Speed1)
MotorCharacteristics
Power S upply
120VAC
Frequency
60 Hz
Amperage
0.9__.10% A
Wattage Rating
110 Watts
MotorResistance
Red- Brown
27.5__.10% O hms
Red-Black
55.7+10%Ohms
Red- Gray
86.8__.10% O hms
Red-White
117.7__.10% O hms
11