Aldea Domotica Termolink WiFi Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Thermostat Aldea Domotica Termolink WiFi herunter. Aldea Domotica Termolink WiFi 8 Seiten. Digital screen indicatingroom temperature and clock. anti-freeze setting 4 customisable programs for each day of the week. ergonomic wall mount. relay output na 5a to 250 vac power 230 vac 50 hz size 120 x 100 x 80 mm
Seite druckenTermolink WiFi
CONNECTION
INSTALATION SEQUENCE
WALL MOUNT
Attach the back plate to the wall passing the boiler wires
and the two 230 V mains wires through the openings.
Mark and drill the openings on the wall to receive the
plastic wall anchors.
Screw on and mount the back plate with the screws
while leaving the vertical screw loose to be able to level
the device.
Once levelled tighten up the screw.
CONNECT
Once the back plate is installed, snap on the thermostat
cover as shown in the drawing. Make sure that the
connection terminals are attached correctly to the back
plate and that the cover is correctly positioned. You will
see that the thermostat is sloped for correct viewing of
the screen at a height of 1.40 metres, recommended
for the installation.
CONNECTION
TO
THERMOSTAT
230 Vca
2
CONNECTION
TO
230 Vca
CONNECT WIRES
Connect the wires as indicated in the phase terminal
serigraph
Ref. AD3012