Yamaha DME32 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha DME32 herunter. Yamaha DME32 16 Seiten. Digital mixing engine
Auch für Yamaha DME32: Hardware-Setup-Handbuch (12 seiten)
Seite drucken
6
GEQ
The three stereo GEQ components are shown below.
Each GEQ control window consists of five sections: INPUT, HPF, LPF, EQ bands, and
OUTPUT. The center frequency of each band is shown above each slider. Since the only
difference between all the GEQ components is the number of bands, only the stereo 15
BAND GEQ control window is shown here.
The parameter ranges for the stereo GEQ components are as follows.
Section
ON/OFF
INPUT
HPF
LPF
EQ band Gain
OUTPUT LEVEL
MUTE
DME32—Owner's Manual Supplement
Parameter
Range
ON/OFF
LEVEL
Mute to 0.0 dB
PHASE
NOR/REV
Frequency 20.0 Hz–20.0 kHz
ON
ON/OFF
Frequency 20.0 Hz–20.0 kHz
ON
ON/OFF
–15 dB to +15 dB
Mute to 0.0 dB
ON/OFF
Description
Turns the component on and off
Adjusts the input signal level
Inverts the input signal
Adjusts the HPF cutoff frequency
Turns the HPF on or off
Adjusts the LPF cutoff frequency
Turns the LPF on or off
Adjusts the gain of each band
Adjusts the output signal level
Mutes the output